DA-300M Warranty Digital Electronic Apparent Density Test Equipment ,Easy to Use

<p>No need to open and close the lid with the completed aluminum alloy measuring table; Simple operation and conform to the new materials laboratory operation specification; automatically judge whether the sample is qualified or not; Function of warning and measuring the volume abrasion value DIN of rubber,of Akron,and expansibility; Measuring the true density with pycnometer method for powder material; Function of waterproofing treatment with boiling saturation method,impregnated saturation method,vacuum saturation method,surface sealing wax covering method,and surface covering method,and automatic measuring the porosity,oil content and water absorption; The purity of the main material in two kinds of mixture also can be measured. </p><p></p><p>Specification:</p><p></p><p>Mode: DA-300M </p><p></p><p>Measuring range: 0.001-99.999g/cm3 </p><p></p><p>Minimum weight: 0.005g </p><p>Maximum weight: 300g </p><p>Resolution: 0.001 g/cm3 </p><p></p><p>Mode: DA-600M </p><p></p><p>Measuring range: 0.001-99.999g/cm3 </p><p></p><p>Minimum weight: 0.005g </p><p>Maximum weight: 600g </p><p>Resolution: 0.001 g/cm3 </p><p></p><p>Mode: DA-900M </p><p></p><p>Measuring range: 0.001-99.999g/cm3 </p><p></p><p>Minimum weight: 0.01g </p><p>Maximum weight: 900g </p><p>Resolution: 0.001 g/cm3 </p><p></p><p>Mode: DA-1200M </p><p></p><p>Measuring range: 0.001-99.999g/cm3 </p><p></p><p>Minimum weight: 0.01g </p><p>Maximum weight: 1200g </p><p>Resolution: 0.001 g/cm3 </p><p></p><p>Features:</p><p>(1)No need to open and close the lid; Simple operation;Shorter time; According to the specification of new materials laboratory.</p><p>(2)Show the percentage composition of mixed samples for researching and developing new materials.</p><p>(3)Automatically judge whether the sample is qualified or not;prompt alarm. </p><p>(4)Function of automatic zero tracking,buzzer warning,and overload warning. </p><p>(5)Function of solution compensation.necessary if liquid other than water is used as a medium for measurement. </p><p>(6)Function of setting actual water temperature,measuring medium density,and water proof medium density. </p><p>(7)Function of setting aerostatic buoyancy compensation and the bound of density. </p><p>(8)Adopt the completed high-capacity measurement accessories with the transparent injection moulding sink,which can resist wear,fall off,and corrosion. </p><p>(9)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and . </p><p>(10)Interface of RS-232C is included.the printer of DE-40 is available to connect PC with instrument. </p><p>Standard Accessories:</p><p>Host,Sink,Test board,Tweezer,Thermometer,100G weight,Windproof and dustproof cover,A set of measuring grain accessories,A set of measuring floating body accessories,Power Transformer</p><p>Measurement Procedure of Non-hydroscopicity Products:</p><p>(1)Place sample on test board to measure weight in air,and then press ENTER button to memory. </p><p>(2)Place the sample into water to measure weight in water,and then press the ENTER button to memory. Density value is displayed. </p><p>Measurement Procedure of Hydroscopicity Products:</p><p>(1)Place sample on the test board to measure weight in air,and then press the ENTER button to memory.</p><p>(2)Place sample that did waterproof treatment into water to measure weight in water, and</p>

• Digital Electronic Apparent Density Test Equipment
• Shorter measuring time,Multifunction,0.001 g/cm3 density resolution,Can be applied to porous material.
• Application: Rubber,Plastic,Wire and Cable,Tire,Powder,Ceramic,Magnetic Material,Field of quality management,cost control, rapid density test in site.Hard Alloy,New Material.